Products - Two Hose System - Accessories

   Nozzle Cases  |  Blast Guns  |  Compressed Air Nozzles  |  Nozzles  |  Hose Package  |  Accessories
 

Nozzle Cases

 
  GAP 3 
    
 GAP 3 nozzle case
     
 Weight:  12 kg (26 Ibs)
 Dimensions:  (W x L x H) 730 x 460 x 150 mm (29 x 18 x 6 inch)
consisting of:
    
 Flat nozzles:  Angled nozzles:
1x FD2 MOD GAP 3   1x WD 45/360 K MOD GAP 3
1x FD 360 K MOD GAP 3   1x WD 45/360 L MOD GAP 3
    1x FD 400-25-4
 Round nozzles:    Compressed air nozzles:
1x RD 180 POM #2 and #7   1x GA 6 GAP 3
1x RD 180 ALU #2 and #7   1x GA 6 GAP 3
1x RD 290 POM #2 and #7    
1x RD 290 ALU #2 and #7   1x GAP 3 special wrench
     
1x Additional handle   1x Low temperature grease
1x Holder for additional handle    
     
 Article number:  706 100

  SX

 SX micro Plus nozzle case
    
 Weight:  14,5 kg (22 Ibs)
 Dimensions:  (W x L x H) 790 x 600 x 150 mm (31 x 24 x 6 inch)
consisting of:
    
 Flat nozzles:    Angled nozzles:
1x FD2 MOD SX   1x WD 45/360 K SX
     
 Round nozzles:    Compressed air nozzles:
1x RD 290 SX ALU #2   1x A9 for #2
1x RD 290 SX POM #3   1x B14 for #3
1x RD 290 SX ALU #4   1x C21 for #4
1x RD 290 SX POM #5   1x D6 for #3
1x RD 290 SX ALU #7   1x E9 for #3
1x RD 290 SX POM #8   1x F14 for #4
    1x G6 for #7
5x Spare O-rings   1x H9 for #8
1x Additional handle   1x I14 for #5
1x Holder for additional handle    
1x Low temperature grease   1x SX special wrench
    
 Article number:  706 400



Blast Guns

 
  GAP 3
    
 GAP 3 blast gun

Robust and heat-resistant blast gun with integrated blast pressure control and vertical hose feed. Particularly suitable for use in the extreme temper-ature range and for places which are hard to reach (with power control).

     
 Weight:  0,8 kg (1,8 Ibs)
 
 
 
 
 
 
 Article number:  610 100  - pneumatic
 Article number:   610 100 E  - electric


 LPG 1000 blast gun

The model which has been constructed based on the GAP 3 blasting pistol and has an integrated blast pressure control and vertical hose feed is particularly suited for cleaning places which are hard to reach, e.g. shapes with undercuts.

     
 Weight:  0,9 kg (2 Ibs)
 
 
 
 
 
 
 Article number:  615 000 


 GAP 3 special wrench

Special wrench for quickly changing the compressed air nozzle in the blast gun.

     
 Weight:  0,16 kg (0,4 Ibs)
 Article number:  706 101


  SX
   
 SX Micro Plus blast gun

The ergonomic design of this blasting pistol with integrated blast pressure control and horizontal hose feed makes for effortless work, even above the head (with power control).

     
 Weight:  1,2 kg (2,6 Ibs)
 
 
 
 
 
 
 Article number:  640 100  - pneumatic
 Article number:   640 100 E  - electric


 SX Micro R blast gun

Blast gun with mounting plate for automated use, e.g. robot (with power control).

     
 Weight:  0,4 kg (0,9 Ibs)
 Article number:  650 100 


 SX special wrench

Special wrench for quickly changing the compressed air nozzle in the blast gun.

     
 Weight:  0,9 kg (2 Ibs)
 Article number:  706 401



Compressed Air Nozzles

 
  GAP 3 
     
 GAP 3 compressed air nozzles  

Optimum exploitation of the available compressed air source, combinable with all GAP 3 blast nozzles.

 
       
  GA 6 GAP 3  Operating range:  5 - 9 bar
 Air consumption:  6 m3/min
 Article number:  756 100-GA6
  GA 9 GAP 3  Operating range:  7 - 12 bar
 Air consumption:  3,8 m3/min
 Article number:  756 100-GA9


  SX 
    
 Standard compressed air nozzles

The Mini-Jet is fitted with a universal nozzle in the factory which can be used for the whole range of applications.

    
  Standard  Operating range:  1 - 8 bar
 Air consumption:  2,8 m3/min
 Article number:  756 400-0


 SX compressed air nozzles  

The blast nozzles are combined with the compressed air nozzles (#2 - #8) depending on the compressed air source.

 
       
 Power Set  
      
  A9 for #2  Operating range:  7 - 12 bar
 Air consumption:  3,8 m3/min
 Article number:  756 401-9
  B14 for #3  Operating range:  10 - 17 bar
 Air consumption:  5,6 m3/min
 Article number:  756 402-14
  C21 for #4  Operating range:  17 - 21 bar
 Air consumption:  8,5 m3/min
 Article number:  756 403-21

  D6 for #3  Operating range:  5 - 9 bar
 Air consumption:  4 m3/min
 Article number:  756 404-6
  E9 for #3  Operating range:  7 - 12 bar
 Air consumption:  5,6 m3/min
 Article number:  756 405-9
  F14 for #4  Operating range:  10 - 17 bar
 Air consumption:  8,5 m3/min
 Article number:  756 406-14

  G6 for #7  Operating range:  5 - 9 bar
 Air consumption:  6 m3/min
 Article number:  756 407-6
  H9 for #8  Operating range:  7 - 12 bar
 Air consumption:  8,5 m3/min
 Article number:  756 408-9
  I14 for #5  Operating range:  10 - 17 bar
 Air consumption:  12,8 m3/min
 Article number:  756 409-14



Nozzles

 
  GAP 3
   
 FD2 MOD GAP 3 flat nozzle

Aluminium nozzle, including handle, suitable for cleaning large surface objects. Can be combined with blast gun GAP 3 and LPG 1000 as well as air nozzles GAP 3!

     
 Length:  380 mm (15 inch)
 Weight:  0,9 kg (2 Ibs)
 Outlet opening:  60 x 5 mm (2,4 x 0,2 inch)
 Air consumption:  3,8 m3/min - 6 m3/min
 Article number:  716 130-00


 FD 360 K MOD GAP 3 flat nozzle

Short aluminium nozzle 360 rotatable, for cleaning larger surfaces.
Can be combined with blast gun GAP 3 and LPG 1000 as well as air nozzle GA 9 GAP 3!

     
 Length:  240 mm (9,5 inch)
 Weight:  0,5 kg (1,1 Ibs)
 Outlet opening:  48 x 5 mm (1,9 x 0,2 inch)
 Air consumption:  3,8 m3/min - 6 m3/min
 Article number:  716 140-360


 WD 45/360 K GAP 3 angled nozzle

For places which are difficult to reach, e.g. shapes with undercuts.
Can be combined with blast gun GAP 3 and LPG 1000 as well as air nozzle GA 9 GAP 3!

      
 Length:  160 mm (6,3 inch)
 Weight:  0,4 kg (0,9 Ibs)
 Diameter:   12,5 mm (0,5 inch)
 Air consumption:  3,8 m3/min
 Article number:  746 163


 WD 45/360 L GAP 3 angled nozzle

For places which are difficult to reach or cramped spaces.
Can be combined with blast gun GAP 3 and LPG 1000 as well as air nozzle GA 9 GAP 3!

     
 Length:  260 mm (10,2 inch)
 Weight:  0,5 kg (1,1 Ibs)
 Diameter:   12,5 mm (0,5 inch)
 Air consumption:  3,8 m3/min
 Article number:  746 164


 RD 180  and RD 290 POM / ALU GAP 3 round nozzles 
POM (polyacetal) / ALU (aluminium) high-performance round nozzles for removing stubborn incrustation. Can be combined with blast guns GAP 3 and LPG 1000 as well as air nozzle GA 9 GAP 3!
   
 RD 180 POM / ALU GAP 3
 
 
Length: Weight - POM: Weight - ALU:
180 mm (7 inch) 0,1 kg (0,22 Ibs) 0,15 kg (0,33 Ibs)
    
  #2  Diameter:   16 mm (0,63 inch)
 Air consumption:   3 m3/min at 6 bar
 Article number - POM:  726 122-180
 Article number - ALU:   726 142-180
 
  #7  Diameter:   18,8 mm (0,74 inch)
 Air consumption:   6 m3/min at 6 bar
 Article number - POM:  746 127-180
 Article number - ALU:   726 147-180

 RD 290 POM / ALU GAP 3
    
Length: Weight - POM: Weight - ALU:
290 mm (11,4 inch) 0,15 kg (0,33 Ibs) 0,25 kg (0,55 Ibs)
    
  #2  Diameter:   16 mm (0,63 inch)
 Air consumption:   3 m3/min at 6 bar
 Article number - POM:  726 122-290
 Article number - ALU:   726 142-290
  
  #7  Diameter: 18,8 mm (0,74 inch)
 Air consumption:   6 m3/min bei 6 bar
 Article number - POM:  746 127-290
 Article number - ALU:   726 147-290


   SX 
    
 RD 200, RD 290, RD 600 and RD 1000 POM / ALU SX round nozzles
POM (polyacetal) / ALU (aluminium) high-performance round nozzles for removing stubborn incrustation. Can be combined with blast guns SX!
   
 RD 200 POM / ALU SX
 
Length: Air consumption: Weight - POM: Weight - ALU:
200 mm
(7,9 inch)
2,8 - 12,8 m3/min at 6 bar (90 psi),
depending on the compressed air nozzle used
0,18 kg
(0,4 Ibs)
0,35 kg
(0,8 Ibs)
    
  #2  Diameter:   16 mm (0,63 inch)
 Article number - POM:  726 422-200
 Article number - ALU:  726 442-200
 
  #3  Diameter:   16,7 mm (0,66 inch)
 Article number - POM:  726 423-200
 Article number - ALU:   726 443-200
  
  #4  Diameter:   17,4 mm (0,69 inch)
 Article number - POM:  726 424-200
 Article number - ALU:   726 444-200
  
  #5  Diameter:   18,1 mm (0,71 inch)
 Article number- POM:  726 425-200
 Article number - ALU:   726 445-200
   
  #7  Diameter:   18,8 mm(0,74 inch)
 Article number - POM:  726 427-200
 Article number - ALU:   726 447-200
  
  #8  Diameter:   19,5 mm (0,77 inch)
 Article number - POM:  726 428-200
 Article number - ALU:   726 448-200

 RD 290 POM / ALU SX
   
Length: Air consumption: Weight - POM: Weight - ALU:
290 mm
(11,4 inch)
2,8 - 12,8 m3/min at 6 bar(90 psi),
depending on the compressed air nozzle used
0,26 kg
(0,6 Ibs)
0,5 kg
(1,1 Ibs)
  
  #2  Diameter:   16 mm (0,63 inch)
 Article number- POM:  726 422-290
 Article number - ALU:   726 442-290
 
  #3  Diameter:   16,7 mm (0,66 inch)
 Article number - POM:  726 423-290
 Article number - ALU:   726 443-290
  
  #4  Diameter:   17,4 mm (0,69 inch)
 Article number- POM:  726 424-290
 Article number - ALU:   726 444-290
  
  #5  Diameter:   18,1 mm (0,71 inch)
 Article number - POM:  726 425-290
 Article number- ALU:   726 445-290
  
  #7  Diameter:   18,8 mm(0,74 inch)
 Article number - POM:  726 427-290
 Article number - ALU:   726 447-290
  
  #8  Diameter:   19,5 mm (0,77 inch)
 Article number - POM:  726 428-290
 Article number - ALU:   726 448-290

 RD 600 POM / ALU SX
    
Length: Air consumption: Weight - POM: Weight - ALU:
600 mm
(23,6 inch)
2,8 - 12,8 m3/min at 6 bar (90 psi),
depending on the compressed air nozzle used
0,54 kg
(1,2 Ibs)
1 kg
(2,2 Ibs)
    
  #2  Diameter:   16 mm (0,63 inch)
 Article number - POM:  726 422-600
 Article number - ALU:   726 442-600
  
  #3  Diameter:   16,7 mm (0,66 inch)
 Article number - POM:  726 423-600
 Article number - ALU:   726 443-600
  
  #4  Diameter:   17,4 mm (0,69 inch)
 Article number - POM:  726 424-600
 Article number - ALU:   726 444-600
  
  #5  Diameter:    18,1 mm (0,71 inch)
 Article number - POM:  726 425-600
 Article number - ALU:   726 445-600
  
  #7  Diameter:    18,8 mm (0,74 inch)
 Article number - POM:  726 427-600
 Article number - ALU:   726 447-600
  
  #8  Diameter:    19,5 mm (0,77 inch)
 Article number - POM:  726 428-600
 Article number - ALU:   726 448-600

 RD 1000 POM / ALU SX
    
Length: Air consumption: Weight - POM: Weight - ALU:
1000 mm
(39,4 inch)
2,8 - 12,8 m3/min at 6 bar (90 psi),
depending on the compressed air nozzle used
0,9 kg
(2 Ibs)
1,7 kg
(3,7 Ibs)
     
  #2  Diameter:    16 mm (0,63 inch)
 Article number - POM:  726 422-1000
 Article number - ALU:   726 442-1000
  
  #3  Diameter:    16,7 mm (0,66 inch)
 Article number - POM:  726 423-1000
 Article number - ALU:   726 443-1000
    
  #4  Diameter:    17,4 mm (0,69 inch)
 Article number - POM:  726 424-1000
 Article number - ALU:   726 444-1000
  
  #5  Diameter:    18,1 mm (0,71 inch)
 Article number - POM:  726 425-1000
 Article number - ALU:   726 445-1000
  
  #7  Diameter:    18,8 mm (0,74 inch)
 Article number - POM:  726 427-1000
 Article number - ALU:   726 447-1000
  
  #8  Diameter:    19,5 mm (0,77 inch)
 Article number - POM:  726 428-1000
 Article number - ALU:   726 448-1000


 FD2 MOD SX flat nozzle

Aluminium nozzle, including handle, suitable for cleaning large surface ob-jects. Can be combined with blast guns SX as well as air nozzles SX!

     
 Length:  380 mm (15 inch)
 Weight:  1 kg (2,2 Ibs)
 Outlet opening:  60 x 5 mm (2,4 x 0,2 inch)
 Air consumption:  3,8 m3/min - 6 m3/min
 Article number:  716 440-00


 FD 360 K MOD SX flat nozzle

Short aluminium nozzle 360 rotatable, for cleaning larger surfaces. Can be combined with blast guns SX as well as air nozzle Standard!

    
 Length:  240 mm (9,5 inch)
 Weight:  0,6 kg (1,3 Ibs)
 Outlet opening:  48 x 5 mm (1,9 x 0,2 inch)
 Air consumption:  3,8 m3/min - 6 m3/min
 Article number:  716 440-360


 WD 45/360 K SX angled nozzle

For places which are difficult to reach, e.g. shapes with undercuts. Can be combined with blast guns SX as well as air nozzle Standard!

     
 Length:  160 mm (6,3 inch)
 Weight:  0,33 kg (0,7 Ibs)
 Diameter:   12,5 mm (0,5 inch)
 Air consumption:  3,8 m3/min
 Article number:  746 162


 WD 45/360 L SX angled nozzle

For places which are difficult to reach or cramped spaces. Can be combined with blast guns SX as well as air nozzle Standard!

     
 Length:  260 mm (10,2 inch)
 Weight:  0,4 kg (0,9 Ibs)
 Diameter:   12,5 mm (0,5 inch)
 Air consumption:  3,8 m3/min
 Article number:  746 165




Hose Packages

 
  GAP 3
 
 Hose package / GAP 3 extension  

Special low-temperature CO2 hose, pneumatic control cables and breathab-le protective sleeve.

 
    
per meter  Article number: 520 002  - pneumatic 
 Article number: 520 002 E   - electric 
    
5 meter  Article number: 520 006  - pneumatic 
 Article number: 520 006 E  - electric  
    
7 meter  Article number: 520 001  - pneumatic 
 Article number: 520 001 E  - electric 
 
10 meter  Article number: 520 003  - pneumatic 
 Article number: 520 003 E  - electric 
    
 - Other length on request! -

   GAP 3 spare hose package 
       
consisting of:
  GAP 3 blast gun with power control
  blast hose package 7 meter
   (with PVC sleeve inclusive bent protection spring)
   
 
 
 Article number: 520 004 GAP  - pneumatic 
 Article number: 520 005 E GAP  - electric 


   GAP 3 service hose package 
       
2. hose package with order of blast machine
     
consisting of:
  GAP 3 blast gun with power control
  blast hose package 7 meter
   (with PVC sleeve inclusive bent protection spring)
   
 
 Article number: 520 005 GAP  - pneumatic 
 Article number: 520 005 E GAP  - electric 


  SX Micro Plus
 
 Hose package / SX Micro Plus extension  

Special low-temperature CO2 hose, pneumatic control cables and breathab-le protective sleeve.

 
    
per meter  Article number: 520 012  - pneumatic 
 Article number: 520 012 E   - electric 
    
5 meter  Article number: 520 013  - pneumatic 
 Article number: 520 013 E  - electric  
    
7 meter  Article number: 520 011  - pneumatic 
 Article number: 520 011 E  - electric 
 
10 meter  Article number: 520 014  - pneumatic 
 Article number: 520 014 E  - electric 
    
 - Other length on request! -

   SX Micro Plus spare hose package 
       
consisting of:
  SX Micro Plus blast gun with power control, inclusive
   hand grip
  blast hose package 7 meter
   (with PVC sleeve inclusive bent protection spring)
   
 
 Article number: 520 004  - pneumatic 
 Article number: 520 004 E  - electric 


   SX Micro Plus service hose package 
       
2. hose package with order of blast machine
     
consisting of:
  SX Micro Plus blast gun with power control, inclusive
   hand grip
  blast hose package 7 meter
   (with PVC sleeve inclusive bent protection spring)
    
 
 Article number: 520 005  - pneumatic 
 Article number: 520 005 E  - electric 


Accessories

 
 Quick-Fit / coupling system

The stainless steel Quick-Fit is a coupling system for plugs and couplings for the quick release of the blast hoses.

    
Pressure range to max. 45 bar (653 psi)
    
 Article number:  NZ 000 0


 Typ MJ 20 hopper extension (standard)

To increasing the capacity of the dry ice hopper another 20 kg. Ideal for cleaning large-surface objects.

   
 Weight:  15 kg (33 Ibs)
     
    
 
     
 Article number:  300 001
- Other types available on request! -